Timco
-
Timco Metal Cavity Anchors Zinc (Various Sizes)
£1.00 – £7.32 exc. VatSuitable for soft faced hollow cavity walls and panels like plasterboard, this zinc-plated cavity fixing is ideal for the hanging of radiators, brackets, handrails and shelving units. It features combi recess, a washer and two rotation teeth that prevents the anchor from spinning. Recommended for clean, dry and low humidity environments.
-
Timco Multi-Fix CSK ZYP Concrete Screw
£1.00 – £6.28 exc. VatAn effective light duty anchoring system that fixes into concrete, brick, stone, concrete block and wood with ease. This is a single solution you can use to replace traditional fixings such as nylon frame and hammer fixings. Zinc-plated and yellow passivated for the increased corrosion resistance. An ideal choice for fitting windows and door frames.
-
Timco Metal Speed Plugs with Screws 31.5mm
£1.00 – £7.32 exc. VatFor use in a wide range of applications, this is a light duty plasterboard fixing that comes complete with screws. It can be rapidly installed using a Pozidriv or cross-drive screwdriver thanks to the cross-recess head. Accompanying screws measure 4.5 x 30mm.
-
Timco Self-Tapping Countersunk Zinc-Coated Pozidriv Screws
£1.00 exc. VatManufactured to BS 4174:1972, these countersunk Pozidriv screws are plated in Trivalent Chromium (Cr3) and are used to stich or attaching to metal. They have a 60? self-tapping thread for easy insertion. Requires pre-drilled hole.
-
Timco Carriage Bolts with Hex Nuts (Various Sizes)
£1.24 – £9.68 exc. VatPrimarily used for clamping timber or attaching ironmongery to timer, these Timco carriage bolts have square anti-spin shoulder. Each bolt has an accompanying nut. Manufactured to DIN 603 and DIN 934. Note: Quantity in each pack depends on size.
-
-
Timco Addax SDS Plus Hammer Drill Bit
£1.38 – £1.54 exc. VatThese professional quality and cost-efficient drill bits are available in a range of sizes for use in rotary hammer drills with an SDS plus tool system. Tipped with tungsten carbide, this SDS plus drill bit is ideal for drilling in concrete, granite, brick and stone.
-
Timco Fine Thread Drywall / Plasterboard Screws
£1.56 – £10.50 exc. VatUsed to secure plasterboard to wall/ceiling track systems.• Phillips No.2 recess for a positive drive
• Bugle head to reduce likelihood of damaging the board surface
• 25° super sharp point for ease of penetration
• 60° twin-thread offers excellent pull-out values and insertion speed -
Timco Forged Eyes with Shield Anchors Yellow
£2.00 exc. VatThreaded eye bolt for attaching ropes or cables, complete with three segment shield anchors. Manufactured using a forging process for extra strength, while zinc and yellow passivated for improved corrosion resistance. Includes nut and washer. Forged eye grade 4.8.
-
Timco Veto Weatherproof Padlock 40mm
£4.08 exc. VatA durable and laminated padlock that is a great choice for use ion sheds, gates and chains. The padlock is equipped with a vinyl cove to fight corrosion and equip with weatherproofing. The four-pin brass cylinder and hardened steel shackle gives protection again picking as well as hacksaw and cropping attacks, helping to deter thieves from your property.
-
Timco FirmaHold Collated Straight Brad Nails – 16 Gauge, Galvanised
£4.18 – £7.90 exc. VatIdeal for internal applications such as skirting, architrave, tongue and groove fixing with a T head for a concealed finish.
• Straight collation
• T Head to give a concealed fixing
• Shank Design: Low penetration resistance into all materials -
Timco X6 Impact Sockets 21 x 52mm
£5.49 exc. Vat21mm short impact socket with pin and ring to ensure a secure retention to a power tool. Ideal when working at heights and frequently used during scaffolding installation due to retaining pin and ring. For use with impact drivers with a 1/2″ square drive.
-
Timco Wing-Tip Zinc Self-Drilling Screws Countersunk PH
£5.74 – £11.48 exc. VatSpecifically designed to attach wood to light section steel (Max. 4mm). Coarse self-tapping thread with wings designed to ream out the timber, so the screw can achieve Max. R.P.M. without burning out. When the wings hit the metal, they will break off to permit the thread to self-tap into the metal.
-
Timco 8.0 x 65 Zinc-Coated Coach Screws (100 Box)
£6.14 exc. VatA traditional heavy-duty woodscrew mainly used for timber-to-timber applications, attaching ironmongery to timber or into masonry with the use of a nylon plug. Pilot drill holes may be required into certain hardwoods. Thread length is 2/3 of the overall length screw.
-
Timco Addax MT32TN 32mm Titanium-Coated Multi-Tool Blade
£6.36 exc. VatA 32 mm bi-metal blade for use in a multi-function power tool that has a protective titanium coating for extended working life. This blade is a great choice for fine and straight cuts in hard/soft woods, ferrous/non-ferrous pipes, metal sheets and plastics.
-
Resin Mixing Nozzles for 300/410ml Resins
£6.72 exc. VatA unique design for improved mixing that is suitable for both 300ml and 410ml resins. Spare mixer nozzles are useful for smaller applications where a full cartridge of resin is not extruded. Resin can then be reused for subsequent applications.
-
Timco Classic C2 Decking Screw with Organic Green Coating
£7.16 – £25.99 exc. Vat- A premium decking screw using the C2 twin cut technology.
- Coated with a patented multi-layer corrosion resistant plating to withstand up to 1000 hours in a salt spray cabinet.
- This new and innovative design enables the screw to rapidly penetrate the timber, cleanly countersink and securely clamp the decking board to the joists.
-
Timco Multi-Fix Masonry Hex Head Bolts (Multiple Sizes)
£1.00 – £8.90 exc. VatA stress-free and a relatively new solution for anchoring into concrete, stone and wood. They are non-expansive and removes the need for more traditional anchors like shield, throughbolts, sleeve and drop-in anchors. All Steel and non-flammable, meeting BS 7671.
-
Timco SDSMP400 400mm SDS Max Point
£14.28 exc. VatPointed drill tip for use with the SDS Max shank tool for the heavy-duty use of breaking down concrete, brick and other masonry materials. This item should not be used when the power tool is in rotary mode. Heat treated to help minimise bending with a shot blast finish for added rust protection.